Explorer Sport Trac 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Blower Motor: Service and Repair
Front
Blower Motor - Front
REMOVAL
1. Prepare the vehicle for blower motor removal.
1
Disconnect the battery ground cable.
2
Remove the air cleaner assembly.
2. Detach the speed control servo.
1
Disconnect the electrical connector.
2
Remove the bolt.
3
Position the speed control servo aside.
3. Position the coolant expansion tank/windshield washer reservoir aside.
1
Remove the screws and the nuts.
2
Position the coolant expansion tank/windshield washer reservoir aside.
4. Remove the blower motor.
1
Disconnect the vent hose.
2
Disconnect the electrical connector.
3
Remove the four screws.
4
Remove the blower motor.
INSTALLATION
1. To install, reverse the removal procedure.