Explorer Sport Trac 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Vehicles with rear power lock switch
9. Connect and install the rear power lock switch assembly into the rear quarter trim panel.
All Vehicles
10. Position the washer on the rear safety belt guide bolt.
11. Install the rear safety belt guide.
1
Position the rear safety belt guide.
2
Using the special tool, install the rear safety belt guide bolt.
3
Reposition the rear safety belt guide cover around the safety belt guide.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
12. Fold the rear seat into the load floor position.
