Explorer Sport Trac 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Remove the four driveshaft retainer bolts and disconnect the driveshaft. Wire the driveshaft out of the way.
6. NOTE:
^
Do not disconnect the brake lines from the brake hose junction block.
^
Explorer Sport Trac is shown. Explorer Sport brake hose junction block is located on the LH side of the differential housing.
Disconnect the brake hose junction block from the differential housing.
7. Disconnect the vent hose.
8. Disconnect the parking cable and conduit at the parking brake lever, if so equipped.