Explorer Sport Trac 2WD V6-4.0L (2009)
Remote Control: Service and Repair
Steering Wheel Controls
Removal and Installation
1. NOTE: It is not necessary to remove the driver air bag module during this procedure.
NOTE: When removing the steering wheel controls, disengage the RH side of the controls first.
Using a suitable tool (such as a trim removal tool), pry the steering wheel controls out of the steering wheel.
2. NOTE: Do not allow the electrical connector to fall back into the steering wheel.
Remove the steering wheel controls.
-
Disconnect the electrical connector.
3. To install, reverse the removal procedure.