Explorer Sport Trac 2WD V6-4.0L (2009)
Insert the new trailer hitch crossmember assembly into the frame.
12. Hand-start all 8 bolts into the weld nuts in the hitch brackets.
13. Tighten the inboard bolts.
-
Tighten to 235 Nm (174 lb-ft).
14. Tighten the outboard bolts.
-
Tighten to 235 Nm (174 lb-ft).
15. Install the trailer wiring harness.
16. Install the rear bumper cover.
17. Install the spare tire.