ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6895 > < Initial Inspection and Diagnostic Overview|Page 6893
Page 18
background image

-

Is the resistance less than 5 ohms?

Yes

GO to AC12.

No

REPAIR the circuit. TEST the system for normal operation.

-------------------------------------------------
AC6 CHECK CIRCUIT GD120 (BK/GN) FOR AN OPEN

-

Ignition OFF.

-

Disconnect: Negative Battery Cable.

-

Measure the resistance between the trailer battery charge relay pin 85, circuit GD120 (BK/GN), BJB face side and ground.

-

Is the resistance less than 5 ohms?

Yes

GO to AC7.

No

REPAIR the circuit. TEST the system for normal operation.

-------------------------------------------------
AC7 CHECK FOR VOLTAGE TO THE TRAILER BATTERY CHARGE RELAY

-

Measure the voltage between the trailer battery charge relay pin 30, circuit SSB13 (GY/RD), BJB face side and ground.

Initial Inspection and Diagnostic Overview|Page 6895 > < Initial Inspection and Diagnostic Overview|Page 6893