Explorer Sport Trac 2WD V6-4.0L (2009)
Rear door fore, aft and tilt adjustment
13. Remove the front door scuff plate.
14. Remove the rear door scuff plate.
15. Remove the lower B-pillar trim panel.
16. Remove the front safety belt retractor.
-
Remove the front safety belt retractor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
-
Remove the safety belt retractor and position aside.
17. Loosen, but do not remove, the rear door hinge-to-body fasteners enough to allow door adjustment.
Rear door in and out, up and down adjustment
18. Loosen, but do not remove, the rear door hinge-to-rear door fasteners enough to allow door adjustment.
Front and rear door
