Explorer Sport Trac 2WD V6-4.0L (2009)
Hood Latch Release: Service and Repair
Hood Latch Release Handle
Hood Latch Release Handle
Removal and Installation
1. Remove the hood latch. For additional information, refer to Hood Latch See: Hood Latch/Service and Repair/Hood Latch.
2. Remove the screw and the hood latch release handle.
3. Remove the pin-type retainer and the LH A-pillar lower trim panel.
4. Remove the hood latch release cable assembly screw.
5. Release the hood latch release cable from the 4 cable locators and remove the cable.
6. To install, reverse the removal procedure.