Explorer Sport Trac 2WD V6-4.0L (2009)
1. For additional information, refer to the procedures.
A-Pillar Trim Panel
A-Pillar Trim Panel
Removal and Installation
1. Remove the 2 assist handle bolt covers.
2. Remove the 2 assist handle bolts.
-
To install, tighten to 10 Nm (89 lb-in).
3. Remove the assist handle.
4. Position the door opening weatherstrip aside.
5. NOTE: The clip on the LH A-pillar trim panel must remain in the sheet metal. The clip comes off the A-pillar trim panel when the panel is
removed.
Remove the A-pillar trim panel.
