Explorer Sport Trac 2WD V6-4.0L (2009)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor - Front
Wheel Speed Sensor - Front
Removal and Installation
1. Remove the front brake disc.
2. Disconnect the wheel speed sensor electrical connector.
3. Remove the wheel speed sensor harness bolt.
-
To install, tighten to 8 Nm (71 lb-in).
4. Remove the wheel speed sensor harness pin-type retainers.
5. Remove the wheel speed sensor bolt and the wheel speed sensor.
-
To install, tighten the bolt to 17 Nm (150 lb-in).
6. To install, reverse the removal procedure.