Explorer Sport Trac 2WD V6-4.0L (2009)
Idler Pulley: Service and Repair
Accessory Drive Belt Idler Pulley
Accessory Drive Belt Idler Pulley - 4.0L SOHC
Removal and Installation
1. Rotate the accessory drive belt tensioner counterclockwise and remove the drive belt.
2. Remove the bolt and the accessory drive belt idler pulley.
-
To install, tighten to 47 Nm (35 lb-ft).
3. To install, reverse the removal procedure.
-
For correct belt routing, refer to Accessory Drive See: Description and Operation, Accessory Drive Belt Routing, Front End Accessory Drive
(FEAD) - 4.0L SOHC in the Description and Operation.