Explorer Sport Trac 2WD V6-4.0L (2009)
Air Door Actuator / Motor: Service and Repair
Temperature Blend Door Actuator - LH
Temperature Blend Door Actuator - LH
Removal and Installation
1. Remove the LH floor console finish panel.
2. Position the in-vehicle temperature sensor aspirator hose away from the LH temperature blend door actuator.
3. Remove the 3 LH temperature blend door actuator screws.
4. Disconnect the LH temperature blend door actuator electrical connector.
5. Remove the LH temperature blend door actuator.
6. To install, reverse the removal procedure.
Temperature Blend Door Actuator - RH, EATC
Temperature Blend Door Actuator - RH, EATC