Explorer Sport Trac 2WD V6-4.0L (2009)
display.
5. Press and hold the SELECT/RESET button for approximately 2 seconds to enter the compass zone setting mode.
6. Release the SELECT/RESET button.
7. Press and hold the SELECT/RESET button until CIRCLE SLOWLY TO CALIBRATE appears in the integrated display.
8. NOTE: It can take up to 5 circles to complete the calibration.
Slowly drive the vehicle in a circle at no more than 5 km/h (3 mph) until CIRCLE SLOWLY TO CALIBRATE changes to CALIBRATION
COMPLETE in the IC display.
