ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Interior Lamp - Front|Page 8316 > < Dimmer Switch|Service and Repair
Page 1
background image

Dome Lamp: Service and Repair
Interior Lamp - Front

Interior Lamp - Front

Removal and Installation

1. NOTE: Use a small screwdriver to pry open the garage door opener bin.

Open the rear overhead console storage or garage door opener bin to access the retaining screw.

-

Remove the screw.

2. Pull the front of the overhead console down and remove the console from the console retaining clips.

-

Disconnect the electrical connector(s).

3. To install, reverse the removal procedure.

Interior Lamp - Front|Page 8316 > < Dimmer Switch|Service and Repair