Explorer Sport Trac 2WD V6-4.0L (2009)
NOTE: Make sure the headlamp switch and ignition switch are in the OFF position.
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
Vehicles with base fog lamp
2. NOTE: To remove, rotate the bulb approximately one-eighth turn counter clockwise.
Disconnect the electrical connector and remove the fog lamp bulb.
Vehicles with Adrenalin fog lamp
3. NOTE: To remove, squeeze the tabs and pull the fog lamp bulb from the fog lamp assembly.
Disconnect the electrical connector and remove the fog lamp bulb.
All vehicles
4. To install, reverse the removal procedure.
