ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8627 > < Initial Inspection and Diagnostic Overview|Page 8625
Page 20
background image

-

Is any voltage present?

Yes

REPAIR the circuit. TEST the system for normal operation.

No

GO to AC10.

-------------------------------------------------
AC10 CHECK THE TRAILER BATTERY CHARGE RELAY (ALWAYS ON)

-

Measure the voltage between the trailer battery charge relay pin 86, circuit CBP12 (GN/WH), BJB face side and ground.

-

Is any voltage present?

Yes

GO to AC11.

No

INSTALL a new trailer battery charge relay. TEST the system for normal operation.

-------------------------------------------------
AC11 CHECK CIRCUIT CBP12 (GN/WH) FOR A SHORT TO VOLTAGE

-

Disconnect: SJB C2280e.

-

Measure the voltage between the trailer battery charge relay pin 86, circuit CBP12 (GN/WH), harness side and ground.

Initial Inspection and Diagnostic Overview|Page 8627 > < Initial Inspection and Diagnostic Overview|Page 8625