Explorer Sport Trac 2WD V6-4.0L (2009)
Hose/Line HVAC: Service and Repair
Compressor To Condenser Discharge Line
Compressor to Condenser Discharge Line - 4.0L SOHC
Removal and Installation
1. Recover the refrigerant.
2. Remove the compressor-to-condenser discharge line bracket nut and detach the bracket.
-
To install, tighten to 7 Nm (62 lb-in).
3. Remove the compressor discharge fitting nut and disconnect the fitting.
-
Discard the O-ring seal and gasket seal.
-
To install, tighten to 15 Nm (133 lb-in).
4. Disconnect the A/C pressure transducer electrical connector.
5. Remove the condenser inlet fitting nut and disconnect the fitting.
-
Discard the O-ring seal.
-
To install, tighten to 8 Nm (71 lb-in).
6. Remove the compressor-to-condenser discharge line.
7. To install, reverse the removal procedure.
