Explorer Sport Trac 2WD V6-4.0L (2009)
6. Remove the fuel line bracket bolt at the rear of the RH valve cover.
7. Remove the wire harness bolt at the rear of the RH cylinder head.
All vehicles
8. Remove the suction accumulator-to-evaporator line.
9. To install, reverse the removal procedure.
-
Install new O-ring seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
Auxiliary Heater Outlet and Inlet Line - Front
Auxiliary Heater Outlet and Inlet Line - Front
