Explorer Sport Trac 2WD V6-4.0L (2009)
Memory Positioning Module: Service and Repair
Driver Seat Module (DSM)
Removal and Installation
NOTICE: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
NOTE: Prior to the removal of the module, it is necessary to upload the module configuration information to a scan tool. This information must be
downloaded into the new Driver Seat Module (DSM) after installation.
1. NOTE: This step is necessary only if the DSM is being replaced.
Upload the module configuration information from the DSM.
2. Remove the driver seat.
3. Remove the 2 DSM screws.
4. Disconnect the electrical connectors and remove the DSM.
5. NOTE: When a new DSM is installed, it is necessary to download the module configuration information from the scan tool into the new DSM.