Explorer Sport Trac 2WD V6-4.0L (2009)
Clockspring Assembly / Spiral Cable: Service and Repair
Clockspring
Removal
NOTE: The air bag warning indicator illuminates when the correct Restraints Control Module (RCM) fuse is removed and the ignition is ON.
NOTE: The Supplemental Restraint System (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.
1. Remove the driver air bag module. For additional information, refer to Driver Air Bag Module See: Air Bag/Service and Repair/Driver Air Bag
Module.
2. Remove the steering wheel.
3. Remove the 2 screws and instrument panel lower steering column opening cover.
4. Remove the 3 screws and lower steering column shroud.
5. Remove the upper steering column shroud.
6. Disconnect the clockspring electrical connector.