Explorer Sport Trac 2WD V6-4.0L (2009)
Alternator: Service and Repair
Generator - 4.0L SOHC
Removal and Installation
1. Disconnect the battery.
2. Rotate the Front End Accessory Drive (FEAD) belt tensioner counterclockwise and position the FEAD belt aside.
3. Position the protective cover aside and remove and discard the generator B+ terminal nut.
-
To install, tighten to 17 Nm (150 lb-in).
4. Disconnect the generator B+ terminal and the 2 electrical connectors.
5. Remove the 3 bolts and the generator.
-
To install, tighten to 47 Nm (35 lb-ft).
6. If necessary, remove the nut and the generator pulley.
-
To install, tighten to 109 Nm (80 lb-ft).
7. If necessary, remove the cap and nut and position the radial adapter aside.
-
To install, tighten to 11 Nm (97 lb-in).