Explorer Sport Trac 2WD V6-4.0L (2009)
ball stud. Pull back on the selector lever cable end to make sure that the selector lever cable end is correctly installed onto the manual control lever
ball stud.
Install the selector lever cable into the selector lever cable bracket.
5. NOTICE: To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the
selector lever cable bracket.
NOTE: When installing the selector lever cable end, make sure that the selector lever cable end is correctly installed onto the manual control lever
ball stud. Pull back on the selector lever cable end to make sure that the selector lever cable end is correctly installed onto the manual control lever
ball stud.
Install the selector lever cable end onto the manual control lever ball stud and lock the tab.
1. Selector lever cable end.
2. Lock tab.
6. NOTE: If the selector lever cable shield is loose on the selector lever cable, install a new selector lever cable shield.
Install and secure the selector lever cable shield.
All vehicles
7. Push the selector lever cable and grommet through the floorpan.
8. Connect the selector lever cable onto the selector lever housing.
