Explorer Sport Trac 2WD V6-4.0L (2009)
Front Door Window Motor: Service and Repair
Window Regulator Motor - Front Door
Window Regulator Motor - Front Door
Removal and Installation
NOTE: For LH front only, the front window motor must be initialized whenever the front window motor is removed from the window regulator drum
housing, a new window regulator is installed, a new top run is installed or for any operation in which grease or lubricants are applied to the window
regulator or glass run.
1. Remove the front door window regulator. For additional information, refer to Window Regulator - Front Door See: Window Regulator/Front
Door Window Regulator/Service and Repair/Window Regulator - Front Door.
2. Remove the 3 front door window regulator motor bolts.
-
To install, tighten to 7 Nm (62 lb-in).
3. Remove the front door window regulator motor.
4. To install, reverse the removal procedure.
-
For LH front window only, initialize the LH front window motor. For additional information, refer to Window Motor Initialization - Front
See: Service and Repair/Window Motor Initialization - Front.