Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Multifunction Electronic Control Modules: Service and Repair
Generic Electronic Module (GEM)
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Prior to removal of the Generic Electronic Module (GEM), it is necessary to upload module configuration information to the
diagnostic tool. This information needs to be downloaded into the new module once installed.
2. Remove the radio chassis.
3. Remove the center instrument panel finish panel.
1
Remove the screws.
2
Remove the center instrument panel finish panel.
^
Disconnect the electrical connectors.
4. Remove the GEM.
1
Remove the bolt.
2
Disconnect the electrical connectors from the GEM.
INSTALLATION
1. To install, reverse the removal procedure.
CAUTION: Once the new module is installed, it is necessary to download module configuration information from the appropriate diagnostic tool
into the new module.
