Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Front Bumper Cover / Fascia: Service and Repair
FRONT BUMPER COVER
Removal and Installation
1. Remove the radiator grille sight shield.
1. Remove the bolts.
2. Release the retaining clips.
3. Remove the radiator grille sight shield.
2. Remove the two parking lamp assemblies.
1. Remove the two bolts (one each side).
2. Remove the two parking lamp assemblies.
-
Disconnect the electrical connectors.
3. Remove the two headlamp assemblies.
1. Pull upward to release the four tabs (two each side).
2. Remove the two headlamp assemblies.
-
Disconnect the electrical connectors.
