Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Trunk / Liftgate Latch: Service and Repair
Liftgate Latch - Window
REMOVAL
1. Disconnect the battery ground cable.
2. Open the liftgate window glass.
3. Remove the liftgate trim panel.
4. Remove the air escape vent panel.
1
Remove the pin-type retainers.
2
Remove the air escape vent panel.
5. Remove the watershield.
6. Disconnect the liftgate window latch actuating rod.
1
Open the clip.
2
Disconnect the liftgate window latch actuating rod.
7. Disconnect the liftgate window ajar switch electrical connector and remove the nuts.
NOTE: Mark the position of the liftgate window latch prior to removing the nuts.
