Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Body / Frame Mount Bushing: Service and Repair
Body Support - Number 4
BODY SUPPORT- NUMBER 4
Materials
Materials
Removal and Installation
NOTE: Left side shown, right side similar.
Upper and Lower Insulator
1. Remove the liftgate scuff plate.
1. Release the locking tabs.
2. Remove the scuff plate.
2. NOTE: This step may require holding the lower retainer with an appropriate tool.
Position back the carpeting and remove the body mount insulator bolt.
3. NOTE: If the lower body mount will not remove, loosely install the body mount bolt and tap on the body mount bolt head with a hammer.
