ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 9029 > < Air Bag Disarming and Arming|Page 9027
Page 21
background image

15. Position the lower steering column opening finish panel reinforcement and install the bolts.

16. Install the lower steering column opening finish panel.

1

Position the lower steering column opening finish panel to the I/P and push in at the top to seat the retaining clips.

2

Install the screws.

17. Position the hood release handle and install the screws.
18. Connect the battery ground cable.
19. With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).  See: Prove Out Procedure

WARNING:  THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.

20. Check the active restraint system for correct operation.

Air Bag Disarming and Arming|Page 9029 > < Air Bag Disarming and Arming|Page 9027