ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Sunroof / Moonroof Motor|Service and Repair|Page 9138 > < Sunroof / Moonroof Module|Locations|Page 9132
Page 1
background image

Sunroof / Moonroof Motor: Service and Repair

REMOVAL

1. Close the roof opening panel. If necessary, refer to Manual Operation.

2. Position the overhead console aside.

3. Remove the roof opening panel motor.

1

Remove the bolts.

2

Remove the roof opening panel motor.
-

Disconnect the electrical connector.

NOTE:  Make sure that the roof opening panel motor is in the closed position.

INSTALLATION

1. Connect the roof opening panel motor electrical connector.
2. With the ignition switch on and the roof opening panel motor still removed, bump the roof opening panel switch one time only towards the close

or vent position.

3. Install the roof opening panel motor.

1

Position the roof opening panel motor.

2

Install the roof opening panel bolts.

Sunroof / Moonroof Motor|Service and Repair|Page 9138 > < Sunroof / Moonroof Module|Locations|Page 9132