ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Wheel Speed Sensor > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 6229
Page 2
background image

6. CAUTION:  After the electronic hydraulic control unit is installed, it is necessary to bleed the hydraulic brake system. 

NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

To install, reverse the removal procedure.
^

Bleed the HCU.

Wheel Speed Sensor > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 6229