Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
1
Remove and discard the spring nut.
2
Pull the brake drum off the axle shaft.
3. NOTE: If the brake drum will not come off, follow these steps.
Loosen the brake shoe adjusting screw nut.
1
Using a screwdriver, move the brake shoe adjusting lever off the brake adjuster screw.
2
NOTE: Move the adjustment tool handle downward to loosen the brake shoe adjusting screw nut.
Use the Brake Adjustment Tool to loosen the brake shoe adjusting screw nut.
4. Using the Brake Drum Micrometer, measure the brake drum inside diameter.
^
Install a new brake drum if the maximum inside diameter exceeds the specification molded on the brake drum.
5. NOTE: If adjusting the rear brakes, refer to Brake Shoe Adjustment.
To install, reverse the removal procedure.
