Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
8. Install the rear brake disc.
9. WARNING: Always remove any corrosion, dirt or foreign material present on the mounting surfaces of the wheel or the surface of the
wheel hub, brake drum or brake disc that contacts the wheel. Installing wheels without correct metal to metal contact at the wheel
mounting surfaces can cause the wheel nuts to loosen and come off while the vehicle is in motion, causing loss of control.
Clean the wheel hub mounting surface.
10. Install the wheel and tire assembly.
11. Apply tension to the parking brake cable system.
1
Hold the front parking brake cable and conduit taut.
2
Remove the retainer from the parking brake control.
12. Check operation of the parking brake.