Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
5. Disconnect the suction accumulator/drier refrigerant lines.
CAUTION: Use a back-up wrench to prevent damage to the tubes.
6. Remove the two screws and the suction accumulator/drier.
INSTALLATION
1. To install, reverse the removal procedure.
-
If a new suction accumulator/drier is to be installed, transfer the A/C cycling switch to the new suction accumulator/drier.
-
If a new suction accumulator/drier is to be installed, refer to refrigerant oil addition.
2. Evacuate, leak test, and charge the A/C system.
