Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
5. Rotate the vacuum control motor. Disengage the lever and remove the vacuum control motor.
CAUTION: Do not attempt to bend any part of the lever. It is brittle and will break.
INSTALLATION
1. To install, reverse the removal procedure.
Panel/Defrost Door
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the lower steering column opening finish panel.
1
Remove the screws. Detach the hood release handle.
2
Remove the two screws.
3
pull out to release the retaining clips. Remove the lower steering column opening finish panel.
3. Remove the bolts and the lower steering column opening finish panel reinforcement.
