Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Blower Motor Resistor: Service and Repair
Front
REMOVAL
1. Prepare the vehicle for heater blower motor switch resistor removal.
1
Disconnect the battery ground cable.
2
Remove the air cleaner assembly.
2. Detach the speed control servo.
1
Disconnect the electrical connector.
2
Remove the bolt.
3
Position the speed control servo aside.
3. Position the coolant expansion tank/windshield washer reservoir aside.
1
Remove the screws and nuts.
2
Position the reservoir aside.
4. Disconnect the heater blower motor switch resistor electrical connector.
