Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Evaporator Case: Service and Repair
REMOVAL
NOTE:
-
The evaporator core is not separately serviceable, it is serviced only with the evaporator core housing assembly.
-
Replacement of the suction accumulator is not required when repairing the refrigerant system except when there is physical evidence of system
contamination from a failed A/C compressor or damage to the suction accumulator.
-
If an evaporator core leak is suspected, the evaporator core must be leak tested before it is removed from the vehicle.
1. Remove the suction accumulator.
2. Disconnect the blower motor and the blower motor resistor electrical connectors.
3. Detach the windshield wiper fluid hose. Using suitable hose pinching pliers, disconnect the heater hoses.
4. Detach the heater control valve vacuum hose.
5. Disconnect the heater control valve vacuum hose and the vacuum supply hose.
