Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Housing Assembly HVAC: Service and Repair
REMOVAL
1. Prepare the vehicle for plenum chamber removal.
1
Remove the instrument panel. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Removal
and Installation, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
2
Remove the A/C evaporator housing.
3
Remove the Powertrain Control Module (PCM).
2. Remove the PCM heat sink.
1
Remove the ground strap screw.
2
Remove the PCM heat sink.
3. Remove the four nuts and the plenum chamber.
NOTE: To ease the removal of the plenum chamber, first remove the nut located at the center of the dash panel behind the engine cylinder block.
INSTALLATION
1. To install, reverse the removal procedure.
