Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
10. Attach the restraint system diagnostic tool to the vehicle harness side of the clockspring electrical connector at the top of the steering column.
11. Open the glove compartment door past its stops to access the mounting screws.
12. Remove the two screws.
13. CAUTION: Do not handle the passenger air bag module by grabbing the edges of the deployment door. Reaching one hand into the glove
compartment opening push out on the passenger air bag module and separate it from the instrument panel. Note the wire harness routing for
installation.
14. Disconnect the electrical connector and remove the passenger air bag module.
