ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 2156 > < Air Bag Disarming and Arming|Page 2154
Page 17
background image

17. Attach the restraint system diagnostic tool to the passenger seat side air bag floor electrical connector.

18. Remove the tie-strap and disconnect the driver seat side air bag electrical connector.

19. Attach the restraint system diagnostic tool to the driver seat side air bag floor electrical connector.

All vehicles

20. Connect the battery ground cable.
21. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS).  See: Prove Out

Procedure

22. Disconnect the battery ground cable and wait at least one minute.

REACTIVATION

WARNING:  TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS, AND
NOTES AT THE BEGINNING OF THE DEACTIVATION PROCEDURE.

Vehicles with seat side air bags

Air Bag Disarming and Arming|Page 2156 > < Air Bag Disarming and Arming|Page 2154