Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
6. Disconnect the canister vent solenoid hose assembly.
7. Remove the evaporative emission dust separator.
INSTALLATION
1. To install, reverse the removal procedure.
^
Leak test the evaporative emission system. See: Powertrain Management/Emission Control Systems/Evaporative Emissions System/Testing
and Inspection/Component Tests and General Diagnostics/Evaporative Emission System Leak Test
^
Carry out the evaporative emission repair verification drive cycle. See: Powertrain Management/Emission Control Systems/Evaporative
Emissions System/Testing and Inspection/Component Tests and General Diagnostics/Evaporative Emission Repair Verification Drive Cycle
