ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

A/T - 5R55W Harsh Light/Medium Throttle Upshifts|Page 4888 > < Engine Controls/Emissions - Exhaust Sulfur Smell|Page 4883
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
A/T - 5R55W Harsh Light/Medium Throttle Upshifts

Article No.
02-6-2

04/01/02

TRANSMISSION - 5R55W - HARSH UPSHIFTS DURING 
LIGHT TO MEDIUM THROTTLE

FORD:
2002 EXPLORER

MERCURY:
2002 MOUNTAINEER

ISSUE

Some vehicles produced through 2/15/2002 equipped with the 5R55W automatic transmission may exhibit harsh 1-2, 2-3, 3-4 upshifts at light to medium
throttle. This may be caused by the calibration of the Powertrain Control Module (PCM).

ACTION

Verify the condition. If the condition exists; reprogram the PCM with an updated calibration. If the condition persists after the reprogram, continue with
normal diagnostics to pinpoint the condition. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

Verify that at light to medium throttle positions, the 1-2, 2-3 or 3-4 shift is harsh. Prior to performing any service procedures, verify tear tag information.
Refer to the PCM Calibration Information Chart in this article. If the calibration is not at the latest level, follow the procedures found in the Powertrain
Control/Emissions Diagnosis (PC/ED) Service Manual to reprogram the PCM to latest calibration level.

After reprogramming has been completed, the transmission adaptive strategy for pressure control on engagements must be updated.

Install diagnostic equipment and monitor the Transmission Fluid Temperature (TFT).

A/T - 5R55W Harsh Light/Medium Throttle Upshifts|Page 4888 > < Engine Controls/Emissions - Exhaust Sulfur Smell|Page 4883