Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional
Ignition Switch Lock Cylinder-Functional Lock Cylinder
Removal
1. Disconnect the battery ground cable and wait at least one minute.
2. Remove the ignition switch lock cylinder.
1
Insert the ignition key and turn to the RUN position.
2
Press the ignition switch lock cylinder release pin while pulling out the ignition switch lock cylinder.
3. To install, reverse the removal procedure.
^
Verify ignition switch lock cylinder operation.