Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
3. Remove the RH rear quarter trim panel.
4. Disengage the wire harness pin-type retainers from the B-pillar and position the wire harness out of the way.
5. Position the side impact sensor with the bracket away from the B-pillar.
1
Remove the bolts.
2
Position the side impact sensor with the bracket away from the B-pillar.
6. Remove the side impact sensor.
1
Disconnect the electrical connector.
2
Remove the side impact sensor.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS AND
NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.
