Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
9. Route the side air bag wire harness and install the pin-type retainers to the seat back frame.
10. Unroll the seat back trim cover, to position the deployment chute around the side air bag module.
11. Position the air bag deployment chute.
1
Insert the outboard side of the air bag deployment chute between the seat back pad and the side air bag module, pulling it around the outboard
side of the seat back frame.
2
Insert the inboard side of the air bag deployment chute between the seat back pad and the side air bag module from the inboard side of the seat
back.
WARNING:
^
CHECK THE SIDE AIR BAG DEPLOYMENT CHUTE AND ZIPPER FOR DAMAGE. THE DEPLOYMENT CHUTE AND
ZIPPER MUST NOT BE REPAIRED. IF THERE IS ANY DAMAGE TO THE DEPLOYMENT CHUTE OR ZIPPER THE SEAT
BACK TRIM COVER AND DEPLOYMENT CHUTE MUST BE INSTALLED NEW AS A UNIT.
