Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Steering Shaft: Service and Repair
Steering Column Shaft
Removal
1. CAUTION: The steering column must be in the locked position, or the lower end of the steering column is to be secured or wired in such a way
as to prevent the steering column from rotating, resulting in damage to the air bag sliding contact.
NOTE: Discard the upper intermediate shaft to steering column shaft bolt and the upper intermediate shaft to lower steering column shaft bolt
upon removal. Do not reuse; install new bolts.
Remove the bolt securing the upper intermediate shaft to the lower intermediate shaft, at the midpoint connection. Collapse the lower shaft.
Discard original bolt.
^
Use a new pinch bolt.
2. Remove the bolt securing the upper intermediate shaft to the steering column assembly. Remove the intermediate shaft from inside the vehicle.
Discard the original bolt.
Installation
1. To install, reverse the removal procedure.