Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Wheel Fastener: Service and Repair
Rear
Wheel Studs
Special Tool(s)
Special Tools
Removal
CAUTION: Never use a hammer to remove the wheel stud. Damage to the axle flange, hub flange, wheel bearing or hub bearing can result.
1. Raise the vehicle and install safety stands.
2. Remove the wheel and tire assembly.
3. Remove the rear disc brake caliper, rear disc support bracket and brake disc, if so equipped. Support the rear disc brake caliper with safety wire.
4. Using the C-Frame and Screw Assembly, press the wheel stud from its seat and discard.
Installation
CAUTION: Never use air tools to install wheel studs. The serrations can be stripped from the stud.
1. Insert a new wheel stud in the hole in the axle flange, making sure the serrations are aligned with those made by the original wheel stud.