ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

A/T Fluid Level Check and Condition|Page 5215 > < A/T Fluid Level Check and Condition|Page 5213
Page 5
background image

6. If equipped, position the servo heat shield over the servos and clip it to the pan rail.
7. Lower the vehicle.

8. NOTE:  When filling a dry transmission and converter, start with a minimum of 3.7 liters (4 quarts).

Fill transmission to the correct fluid level and check for correct transmission operation.
^

Use MERCON(R) V Automatic Transmission Fluid XT-5-QM meeting Ford specification MERCON(R) V.

A/T Fluid Level Check and Condition|Page 5215 > < A/T Fluid Level Check and Condition|Page 5213