Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
6. Remove the manual control outer lever nut and manual control outer lever.
7. Loosen the screws on the digital TR sensor.
8. Remove the transmission fluid pan.
1
Remove the transmission fluid pan.
2
Remove and discard the transmission fluid pan gasket.
9. Remove the transmission fluid filter.
1
Remove the transmission fluid filter screw.
2
Remove the transmission fluid filter.
10. Remove wire loom guide and protector.
-
Carefully lift up on wire loom guide and protector and disengage the retaining pins from the solenoid clamps.
