Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
22. NOTE: If damage is found to the parking gear, the transmission must be removed and disassembled.
NOTE: The parking pawl, parking pawl return spring and parking pawl shaft may fall out during removal of the extension housing.
Remove the extension housing and discard the extension housing gasket.
23. Inspect the parking pawl, parking pawl return spring and the parking pawl shaft.
-
Install new components if required.
Installation
1. CAUTION: Make sure the parking lever actuating rod is correctly seated into the case parking rod guide cup. Verify that the output shaft is
locked in the PARK position.
Align the flats of the manual valve inner lever with the flats on the manual control lever shaft. Install the manual valve inner lever and parking
lever actuating rod onto the manual control lever shaft.
2. CAUTION: Do not bend the manual valve inner lever pin.
