Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
8. NOTE: Make sure the tab is in the LOCKED position.
NOTE: Install new O-ring seals on the transmission case (16-pin) electrical connector.
Install the transmission case (16-pin) electrical connector.
-
Lubricate the transmission case (16-pin) electrical connector O-ring seals with petroleum jelly.
9. Press the transmission case (16-pin) electrical connector through the case until a click is heard.
10. CAUTION: Align the slot on the TSS sensor electrical connector with the slot in the (16-pin) case connector.
Install the TSS sensor wire.
1
Install the TSS sensor wire into (16-pin) electrical connector.
2
Install the TSS sensor wire into locator.